NUMLAND
  • Abaqus
    • Static and Strength of Materials
      • Analysis of a statically indeterminate 3D truss
      • Analysis of a statically indeterminate 2D truss (Method 1)
      • Analysis of a statically indeterminate 2D truss (Method 2)
      • Analysis of a transmission tower
      • Static Analysis of 3 bars under thermal and mechanical loads, connected to a rigid beam (Method 1)
      • Static Analysis of 3 bars under thermal and mechanical loads, connected to a rigid beam (Method 2)
    • Vibrations
    • Dynamics
  • About Us
  • Abaqus
    • Go Back
    • Static and Strength of Materials
      • Go Back
      • Analysis of a statically indeterminate 3D truss
      • Analysis of a statically indeterminate 2D truss (Method 1)
      • Analysis of a statically indeterminate 2D truss (Method 2)
      • Analysis of a transmission tower
      • Static Analysis of 3 bars under thermal and mechanical loads, connected to a rigid beam (Method 1)
      • Static Analysis of 3 bars under thermal and mechanical loads, connected to a rigid beam (Method 2)
    • Vibrations
    • Dynamics
  • About Us

Category: Static and Strength of Materials

Static Analysis of 3 bars under thermal and mechanical loads, connected to a rigid beam (Method 2)

Static Analysis of 3 bars under thermal and mechanical loads, connected to a rigid beam (Method 2)

As the Figure shows, a rigid beam, AB, hanged via 3 vertical bars with the same lengths and cross sectional areas (0.1 in2). The middle bar is made from steel while the others are from copper. The temperature of bars increases 10 oF and [...]

Static and Strength of Materials
Continue reading

Static Analysis of 3 bars under thermal and mechanical loads, connected to a rigid beam (Method 1)

Static Analysis of 3 bars under thermal and mechanical loads, connected to a rigid beam (Method 1)

As the Figure shows, a rigid beam, AB, hanged via 3 vertical bars with the same lengths and cross sectional areas (0.1 in2). The middle bar is made from steel while the others are from copper. The temperature of bars increases 10 oF and [...]

Static and Strength of Materials
Continue reading

Analysis of a transmission tower

Analysis of a transmission tower

Consider the planar truss with shape of power tower shown in the Figure. The points S and T are attached to the ground to constrain them in all directions. All cross members like CD and BE are made of [...]

Static and Strength of Materials
Continue reading

Analysis of a statically indeterminate 2D truss (Method 2)

Analysis of a statically indeterminate 2D truss (Method 2)

Consider the truss shown in the Figure including 9 members, which can rotate freely at the joints. The whole system is constrained at two points of A and D and a roller support of B. The members CE and [...]

Static and Strength of Materials
Continue reading

Analysis of a statically indeterminate 2D truss (Method 1)

Analysis of a statically indeterminate 2D truss (Method 1)

Consider the truss shown in the Figure including 9 members, which can rotate freely at the joints. The whole system is constrained at two points of A and D and a roller support of B. The members CE and [...]

Static and Strength of Materials
Continue reading

Analysis of a statically indeterminate 3D truss

Analysis of a statically indeterminate 3D truss

Consider the simple, pin-jointed truss with 7 members shown in the figure. The support points (C, D, E, F) are gripped into a vertical wall, so that, they can translate in no direction. We are willing to [...]

Static and Strength of Materials
Continue reading

Calendar

February 2023
M T W T F S S
« Apr    
 12345
6789101112
13141516171819
20212223242526
2728  

NUMLAND All Rights Reserved

@2015-2023 numland.com